Bleacher shade: canopies, shade structures and covered grandstands

Shade for bleachers and grandstands: fabric shade structures, canopies on the stand, covered grandstand roofs, orientation, wind and snow loads, and permits.

Green elevated aluminum grandstand with press box

A crowd will sit through a lot, but not two hours of afternoon sun on aluminum. Shade keeps people in their seats, protects them from UV and stretches a long day of tournament play. There are three ways to do it, and the right one depends on the stand and the weather it has to stand up to.

Start with orientation

The cheapest shade is the sun behind the crowd. On a field that runs north and south, a stand on the west side faces east, so the afternoon and evening sun lands on people’s backs instead of in their eyes. When you are placing a new stand, that choice costs nothing.

1. Fabric shade structures

Freestanding steel frames with tensioned shade fabric, set on their own footings behind or beside the stand and cantilevered over the rows. They work over existing bleachers because they do not load the stand. Shade fabric blocks much of the sun and lets heat escape, but it is not a roof: it does not keep the rain off.

  • The posts need footings and room behind the stand.
  • Many fabric shades are designed to have the fabric taken down before major storms. Check the manufacturer’s wind rating against your site.
  • Fabric wears out and gets replaced; the steel stays.

2. Canopies on the stand

A roof carried by the stand’s own structure, framed over the upper rows or the whole stand. On I-beam and elevated grandstands it is one structure, engineered together, so the frame, the footings and the roof are all sized for the wind and snow on the canopy. A metal roof keeps rain off as well as sun.

A canopy changes the loads on the stand, so it belongs on the drawings from the start. Adding one later usually means checking the frame and the footings first.

3. Covered grandstands

At a stadium the roof can be part of the grandstand: a full structure over the seating, often with the press level or suites under it. It is the most expensive option and the most complete cover from sun and rain. A GB-S stadium grandstand or a GB-E elevated grandstand can carry a roof or canopy as part of the design.

Permits, loads and lightning

  • Shade structures and canopies need building permits and engineered drawings in most places, just like the stand.
  • Wind uplift is the governing load on most shade, because fabric and roofs act like a sail. Snow load matters wherever it snows.
  • Tall metal structures may need lightning protection, and every venue needs a weather plan that clears the stands when lightning is near.
  • Keep the lights, the speakers and the press box view in mind; a canopy can block all three.

Which one fits

OptionKeeps rain offOver an existing standRelative cost
Fabric shade structureNoYes, on its own footingsLowest
Canopy on the standYesUsually needs a frame checkMiddle
Covered grandstandYesNew constructionHighest

If shade is on your list, tell us at the start: it changes the frame and the footings. Send us the site and the stand you have in mind.

Planning a stand? Send us the site, the sport and the crowd and we will come back with a layout, a drawing and a number. Start a project or see how planning works.