A used aluminum bleacher can be the best buy on a tight budget, or a stand you pay for twice. The aluminum itself lasts for decades; what decides the deal is the frame, the guards, the paperwork and the cost of moving it. Here is what we check before we reuse a stand, and what to check before you buy one.
The frame and the welds
- Every weld, for cracks, especially at the column bases, the stringer connections and the guard posts.
- Bent or crushed members from mowers, trucks or a stand that was dropped in a move.
- On a galvanized steel frame, rust breaking through the zinc. On aluminum, white powder or pitting where it touches steel: that is galvanic corrosion, and it means the isolators between the two metals have failed.
Planks and decking
- Planks should be straight and solid underfoot, with no cracks, splits or permanent sag.
- End caps and clips should all be there. One missing is cheap; a whole stand of them adds up.
- Mixed plank colors and profiles usually mean a stand assembled from several. That is fixable, but price it in.
Guards and closures: the part that decides it
Many used bleachers were built before the current rules. Under ICC 300, seating and walking surfaces more than 30 inches above the ground need guards, generally 42 inches high, and openings in the guards and between the planks have to stop a 4-inch sphere. Older stands often have neither. A retrofit is usually straightforward, but it is part of the price of the stand, and an inspector will not pass the stand without it. Bleacher safety codes has the details, and bleacher renovation covers the retrofit.
The paperwork
- The manufacturer and model, and the original drawings if they still exist.
- Inspection reports and repair records.
- The rated capacity. Without drawings, an engineer will need to check the stand before it can be permitted at your site.
Moving it
Taking a stand down, trucking it and putting it back up is real work, and a used bleacher is only cheap if it arrives in usable pieces. Get the cost of disassembly, transport and reinstallation, plus new footings and anchors at your site, before you compare it with a new stand.
When used makes sense, and when it does not
Used makes sense when the frame is sound, the stand fits your site with few changes and the retrofit is small. It does not when the frame is damaged, the drawings are missing on a tall stand, or the move costs more than the savings.
Our repurposed aluminum program does this work for you: we inspect, refurbish and re-engineer used aluminum seating, bring it to current code and install it to the same drawings and standards as new. See used and refurbished aluminum bleachers, read new or repurposed aluminum?, or ask us to look at a stand you are considering.



